EIGRP Questions
Question 1
Which single command should be used to check:
+ the IP address of the EIGRP neighbor
+ the retransmit interface and queue counts of adjacent routers
A. show ip eigrp topology
B. show ip eigrp database
C. show ip eigrp neighbors
D. show ip eigrp topology all-links
Answer: C
Explanation
Below is an example of the show ip eigrp neighbors command. The retransmit interval (Smooth Round Trip Timer – SRTT) and the queue counts (Q count, which shows the number of queued EIGRP packets) for the adjacent routers are listed:
Question 2
Check the topology and output below. Which of the following statement is correct for the traffic from 172.16.1.192/26 to 10.10.10.0/30?
<Redraw>
A. Traffic will be load balanced on two direction
B. Traffic only goes through the R1
C. Traffic only goes through the R2
D. Traffic will be dropped
Answer: A
Question 3
Check the topology below. R1 cannot exchange routing updates with other routers. What can be done to fix this problem?
A. Issue the “no shutdown” command on the Serial interface
B. Change the AS number on TUT to 120
C. The Serial connection must be set to Broadcast
D. All routers must use the same subnet masks so that they can see each other
Answer: B
Question 4
A colleague is studying about EIGRP. He wants to know what a feasible successor is and where it is stored. What will you explain to him?
A. It is a primary route, which is stored in the FIB
B. It is a primary route, which is stored in the topology table
C. It is a primary route, which is stored in the routing table
D. It is a backup route, which is stored in the FIB
E. It is a backup route, which is stored in the topology table
F. It is a backup route, which is stored in the routing table
Answer: E
Question 5
Your company is running EIGRP on their network. Check the topology below. If TUT router wants to send packets to 172.16.1.64/26, which path will it choose?
<Redraw>
A. To Chicago router
B. To Mexico router
C. The traffic will be load balanced
D. The traffic will be dropped
Answer: A